Bosch Carephone 62, User Manual

Page: 14 / 60

14 en | Installation Carephone 62
F.01U.141.162 | V3 | 2012.11 User Manual Bosch Security Systems
5 Installation
5.1 Installation recommendations
– Place the unit on a flat and non-slippery surface.
– Do not install on soft surfaces as this impairs voice quality.
– Do not cover the microphone (right-hand side of the unit).
– Alarms are not sent if the telephone line or the IP
connection are out of order.
– The Carephone must be connected with the power supply.
– To send an alarm, at least one alarm receiver (a monitoring
centre or a private phone) and the subscriber number
must be programmed.
– The power adaptor of the Carephone 62 must placed at
least 10 cm away.
– When using the Carephone 62 with a GSM gateway, place
them at least 1 m from each other.
– When using wireless speakers next to the Carephone 62,
place them at least 4 m away. Be aware that some
loudspeakers, if they use the same frequency as the
Carephone 62, could influence the radio reception.
– Construction materials affect the range of the transmitter.
For example, concrete walls with steel reinforcements
hamper the radio signal more than a brick wall.
– Location of the Carephone 62 affects the range of the
transmitter. The best place to locate it is a central room.
5.2 Placing the Carephone 62
Placing on a surface
The Carephone 62 is designed for use at home. Many items of
furniture are coated with a variety of paints, varnishes and
plastics. The feet of the Carephone 62 may leave marks on
furniture as a result of chemical processes.
CAUTION!
Before installing and programming the Carephone 62, read the
safety instructions carefully.