36
|
Inspection and maintenance
SB625WS/SB745WS
6 720 805 218 (2013/02)
System B (larger size)
▶ Put the door in its correct position.
▶ Tighten the main locking screws [1] until the packing starts to be
compressed.
Fig. 34 Position the door
8.3
Cleaning the boiler
Use a cloth damped in soapy water to clean the boiler’s external
paneling.
To remove stubborn marks, use a cloth damped in a 50% mix of water
and denatured alcohol or a suitable cleaning product.
Carefully dry the boiler after cleaning.
Clean the boiler and remove any carbon deposits from the surfaces of
the heat exchanger
at least once a year
. This not only extends the
boiler’s working life, but also keeps it efficient in terms of heat output
and consumption.
▶ Open the door [1] and pull out the turbulators [2].
▶ Use a flue brush [3] or other suitable tool to clean inside the
combustion chamber and the flue gas pipes.
Fig. 35 Clean the boiler
[1]
Door
[2]
Turbulator
[3]
Flue brush
▶ Open the inspection port [3] and clean out any deposits from inside
the flue gas box.
If more thorough cleaning is required:
▶ Remove the outer panels.
▶ Unscrew the eight fixing bolts and pull firmly on the flue gas box [1] to
remove it from the boiler.
▶ Check at regular intervals that the condensate drain [2] is not
blocked.
Fig. 36
[1]
Flue gas box
[2]
Inspection port
[3]
Condensate drain
Make sure that the door is properly adjusted after every
maintenance operation.
WARNING:
System damage!
▶ Do not use abrasive cleaning pads or powder
detergents.
DANGER:
Risk to life from electric shock!
▶ Before opening a unit: disconnect electrical power
and lock to prevent accidental reactivation.
NOTICE:
The combustion chamber and flues must be cleaned
periodically - at least once a year - by a qualified
technician.
1
1
6 720 805 218-41.1T
1
2
3
6 720 805 218-42.1T
1
2
3
6 720 805 218-43.1T
Summary of Contents for Buderus SB625WS
Page 51: ... 51 6 720 805 218 2013 02 SB625WS SB745WS Notes ...
Page 52: ......