Bosch Basic module TS-AC B1-M2-1X, Operating Instructions Manual

Page: 49 / 60

Troubleshooting | Automax 100 | Basic module TS-AC B1-M2-1X 45/54
Bosch Rexroth AG | 04.2021 | DOK-SUPPL*-TS-AC B1-M2-ITRS-EN-P
Troubleshooting
WARNING
Compromising of the training system, individual components or other assets. Risk
for safe operation of the training system!
Risk of injury or death for operator or third

Chapter „ Safety instructions ” as of page [

7 ] in these operating instructions must
always be observed!
CAUTION
Property damage due to improper handling!
Improper handling can lead to damage or defects at the device!
 Ensure correct polarity of connections. Observe the color coding!
 Any troubleshooting and measures in case of faults must be carried out without any
mechanical force.
Troubleshooting measures
Fault Cause of error Measures
No function of basic module The external power supply unit is not connected
to any voltage supply Connect the external power supply unit to a suitable
supply network. ATTENTION! The specification of
the input voltage of the used external power supply
unit must be observed.
No voltage supply Check the output voltage (DC 24 V) of the external
power supply unit by means of a multimeter.
As necessary, check the fuse protection of the
output voltage of the external power supply unit.
If the power supply unit has a main switch, check if
it is activated.
Device fuse defective at basic module Check the micro-fuse on the front of the basic
module (5x20 mm / 6.3 A).
The input voltage at the basic module is
incorrectly connected Check correct polarity of the supply voltage.
No voltage at the safety sockets
+24V/U
A
at the top of the basic
module
The safety sockets „-1XG4“ and „+24V/U
A
“ are
not bridged via „connector XVB-4/19“ 1) .
Connect the safety sockets
„-1XG4“ and „+24V/U
A
“ via „connector XVB-4/19“.
1) Depending on the application, the connector XVB-4/19 may not be needed
In case of any problems identifying the cause of the error, please contact Bosch Rexroth
customer service.
Contact details can be found in chapter „
Contact addresses “ as of page [  53 ].