82
en | RADION universal transmitter
RADION receiver SD
2020.05 | 13 | F.01U.261.834
Bosch Security Systems B.V.
–
The location of the magnet and transmitter in relationship
to the door/window frame dimensions. Verify you have
proper clearance with the latch of the window or door you
are installing the device onto. Failure to do so will make it
extremely difficult to access and open the device for
maintenance purposes.
–
In some cases, you might need an additional spacer when
installing the transmitter and magnet in the corner of a
recessed door or window frame to close the gap in height
between the magnet and transmitter.
–
On surface areas that are not conducive to mounting via the
screws, you can secure transmitters and magnets using an
industrial strength adhesive.
–
When installing the magnet, verify that the notches in the
magnet base, line up with the notches in the transmitter
base, otherwise the magnet and transmitter do not function
effectively.
–
When installing the magnet base, install the face of the
magnet base flush to the surface edge of the installation
location. This prevents damage to the magnet plastic base
whenever a window or door is opened.
–
Adhere to the distances prescribed in the graphical table
found in the graphical Installation and Operation Guide
when installing the magnet adjacent to the transmitter.
How to read the Graphical Magnet Distances table
Contained in the universal transmitter
Installation and Operation
Guide
is a graphical table along with the
X ￚ Y
ￚ
Z coordinates
graphic. Use the table in conjunction with the graphic to
determine desired distances between the magnet and the
transmitter based on the type of installation (wood or metal).
Notice!
The content in the graphical table applies to EN installations.
