Bosch AUTODOME IP 4000 HD NEZ-4 series, Installation Manual

Page: 18 / 38

Figure 6.4: Connect Cables
1 Locking Screw
2 Vertical Tab
3 Mounting Plate
1. Align wires on side of mounting plate with crescent shaped cut-out.
2. Attach the camera to the mounting plate by inserting the vertical tab on the plate (item 1,
below) into the recessed slot on the top of the camera dome (Item 3) to the right of the
safety locking screw (item 2).
Note: Do not loosen the three brass buttons (item 4). These brass buttons engage the
slotted tabs (item 5) on the mounting plate.
18 en | Installing a Surface Mount AUTODOME IP 4000 HD
2015.03 | 0.1 | Installation Manual Bosch Security Systems