10
Setting Protocol and Video Format
AutoDome Easy
December 06, 2006 | F01U074570 | 3.0
Installation and Configuration Manual
Bosch Security Systems, Inc.
7
Setting Protocol and Video Format
The factory default settings for switches 8, 9, and 0 are set for the correct operation. How-
ever, if the camera is operating incorrectly, the proper configuration is the following:
•
Switch 8 - set to match the appropriate video format;
NTSC (60 Hz) ON
- or -
PAL (50 Hz) OFF.
•
Switches 9 and 0 - set to biphase protocol (see Table 7.1).
Fig. 7.1
AutoDome Easy Camera Function and Protocol Selection Switches
Table 7.1
Dome Camera Function
Table 7.2
Dome Camera Protocol Function
i
NOTICE!
The error message: PROTOCOL IS NOT MATCHED is displayed during the power-up
cycle if switches 9 and 0 are not set correctly.
Reference #
Description
1
Dome Camera Function
2
PDome Camera Protocol Function
S/W No.
ON
OFF
Function
8
NTSC
PAL
NTSC/PAL
No. 9
No. 0
Protocol
ON
OFF
Biphase
1
2
3
4
5
6
7
8
9
0
O
N
1
2
3
4
5
6
7
8
9
0
O
N
O
FF
O
N
1
2
Black = ON
