–
Scan
–
Tour
3.
Select the option "Number."
4.
Set the number for the action. For example, if "Action" is
"Preset" and "Number" is "001," this means Preset 1.
5.
Select the option "Time." This is the dwell time, the amount
of time that the joystick controller can be idle before the
camera returns to Home, a preset, a scan, or a tour.
6.
Set the desired dwell time (from 1 second to 60 seconds
and from 1 minute to 60 minutes).
7.
Select the option "Mode."
8.
Select the appropriate value: Off (Manual) or On (Auto).
9.
Save the settings.
Calibration
Calibration is a function for automatically correcting an error on
the angle of Pan/Tilt. Calibration can be set at Auto or Manual.
In Auto mode, the camera is corrected automatically whenever
there is an error on the angle of the camera. The motor of the
Pan/Tilt will adjust its angle automatically. In Manual mode,
select the option "Calibration" to execute the function.
Error Message Display is a function for displaying an error
message to let a user know when there is an error.
1.
From the MAIN MENU, select DOME MOTION. The
submenu DOME MOTION appears.
2.
Select CALIBRATION. The screen CALIBRATION SETUP
appears.
CALIBRATION SETUP
AUTO CAL
ERROR MSG DISP
7.6.4
AUTDOME 4000 Mini
PTZ Dome
On-Screen Display (OSD) Menu | en
67
Bosch Security Systems, Inc.
2013.4 | |
Summary of Contents for AUTODOME 4000 mini
Page 1: ...AUTDOME 4000 Mini PTZ Dome VEZ 400 Series en Operations Manual ...
Page 2: ......
Page 89: ......
