Power Connections
!
Caution!
The camera unit accepts 24 VAC power only. Do not connect
120 V or 230 V to this camera!
The recommended power cable is a 2-conductor, 14-18 gauge
cable, depending on the distance.
A/W
14 AWG
(2.5
mm)
16AWG
(1.5
mm)
18 AWG
(1.0
mm)
2 A / 43 W (with
heater)
250 m
(820 ft)
150 m
(492 ft)
100 m
(328 ft)
Camera Settings
The camera can communicate with external switching devices
such as a multiplexer or a DVR by setting the Rotary and Dip
switches. Refer to the tables below for setting the camera’s ID
and selecting the protocol. The camera's Dip switches can be
accessed by removing the dome cover, and are located on a PCB
attached to the camera base.
!
Caution!
To prevent humidity problems, the camera’s dome cover must
be removed only in dry conditions.
!
Caution!
When (re)mounting the dome cover to the camera base, ensure
that each screw has a rubber O-ring, and that the large rubber
O-ring is in place on the camera base. This ensures protection
against water ingress.
6.4
6.5
AUTDOME 4000 Mini
PTZ Dome
Connection | en
35
Bosch Security Systems, Inc.
2013.4 | |
Summary of Contents for AUTODOME 4000 mini
Page 1: ...AUTDOME 4000 Mini PTZ Dome VEZ 400 Series en Operations Manual ...
Page 2: ......
Page 89: ......
