6
| English
F 016 L70 916 | (25.6.12)
Bosch Power Tools
E-Mail: [email protected]
Tel. Kundenberatung: +49 (1803) 33 57 99
(Festnetzpreis 9 ct/min, höchstens 42 ct/min aus Mobilfunk-
netzen)
Fax: +49 (711) 7 58 19 30
E-Mail: [email protected]
Österreich
Tel.: +43 (01) 7 97 22 20 10
Fax: +43 (01) 7 97 22 20 11
E-Mail: [email protected]
Schweiz
Tel.: +41 (044) 8 47 15 11
Fax: +41 (044) 8 47 15 51
Luxemburg
Tel.: +32 2 588 0589
Fax: +32 2 588 0595
E-Mail: [email protected]
Entsorgung
Werfen Sie Gartengeräte nicht in den Hausmüll!
Nur für EU-Länder:
Gemäß der Europäischen Richtlinie
2002/96/EG über Elektro- und Elektronik-
Altgeräte und ihrer Umsetzung in nationales
Recht müssen nicht mehr gebrauchsfähige
Elektro- und Elektronikgeräte getrennt ge-
sammelt und einer umweltgerechten Wie-
derverwertung zugeführt werden.
Änderungen vorbehalten.
English
Safety Notes
Explanation of symbols
General hazard safety alert.
Read instruction manual.
Do not touch. After intensive use of the hedge cut-
ter parts can get hot.
Switch off and remove plug from mains before ad-
justing, cleaning or if the cable is entangled and
before leaving the garden product unattended for
any period.
Wear eye protection.
Wear ear protection.
Do not use the machine in the rain or leave it out-
doors when it is raining.
Never touch power supply or tele-
phone lines.
These lines conduct high
voltage and there is severe danger of
electric shock. Keep a minimum dis-
tance of 10 m.
General Power Tool Safety rules
Read all safety warnings and all in-
structions.
Failure to follow the warnings
and instructions may result in electric shock, fire and/or seri-
ous injury.
Save all warnings and instructions for future reference.
f
Before use check the supply and extension cord for signs
of damage or ageing. If the cord becomes damaged during
use, disconnect the cord from the supply immediately. DO
NOT TOUCH THE CORD BEFORE DISCONNECTING THE
SUPPLY. Do not use the garden product if the cord is dam-
aged or worn.
f
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified per-
sons in order to avoid a hazard.
f
When in use perform a daily, visual inspection in order to
identify any significant damage or defects this inspection
must also be competed if the tool is dropped or subjected
to any significant impacts.
f
It is recommended for increased electrical safety to
use a Residual Current Device (RCD) with a tripping
current of not more than 30 mA. Always check your
RCD every time you use it.
f
Always ensure tool ventilation openings are kept free of de-
bris.
f
Observe also the safety notes and instructions in the
user manual of the power unit.
WARNING
OBJ_BUCH-1670-001.book Page 6 Monday, June 25, 2012 4:15 PM
