EN
Combined buffers for central heating and domestic hot water production | 99
Fig. 6
Zipper
Soft PU
insulation
Zipper
Zipper
Decorative plastic cover
Upper soft PU
insulation
Decorative
plastic
rosettes
3. Connecting the serpentines
(heat exchangers) with heating
installation using alternative and
renewable sources
ATTENTION! Qualified P&P spe
-
cialist and technicians must per-
form all assembly works for con-
nection to the heat sources.
The connection of the serpentines (heat
exchangers) with the heating installation
should be done considering the marked out-
lets and inlets as described below:
IS1 (MS)
– Inlet of heat exchanger 1;
OS1
(ES)
– Outlet of heat exchanger 1;
IS2 (M)
– Inlet of heat exchanger 2;
OS2 (E)
- Outlet
of heat exchanger 2
Make sure that the system is empty of air.
The presence of air may cost incorrect work
of the boiler. Maximum temperature of the
heat transfer fluid: 110°C. Maximum pres
-
sure of the heat transfer fluid: 0.6MPa! A
safety valve inline coil heat exchanger have
to be fit according to HVAC designer require
-
ments but its adjustment must not be higher
than Pnr = 0.6MPa. (EN 1489:2000) An ex-
pansion vessel according to HVAC Designer
requirements must be installed!
4. Connecting buffers to the central
heating loop. Examples. (Fig.8)
Buffers for central heating system are in
-
tended for heat accumulation and stratifi
-
cation with subsequent distribution of heat
flows with different temperatures to the spe
-
cific consumers. As an example, on Fig.8 is
shown high and low temperature heating re-
alized by buffer. Heat demand is covered by
gas boiler and solar collectors.
ATTENTION! The buffer is a part
of a complete heating system that
must be designed and checked by
specialized and authorized per-
sonnel! The installation of a safety
valve with the exact release rate is
obligatory!!!
The maximum designed pressure
of the buffer is 3 Bars!
Summary of Contents for Acu Tank AT 1000
