background image

Environmental protection and disposal

23

Air Center Control – 6720892132 (2021/10)

8

Environmental protection and disposal

Environmental protection is a fundamental corporate strategy 
of the Bosch Group. 
The quality of our products, their economy and environmental 
safety are all of equal importance to us and all environmental 
protection legislation and regulations are strictly observed.
We use the best possible technology and materials for 
protecting the environment taking account of economic 
considerations.

Packaging

Where packaging is concerned, we participate in country-
specific recycling processes that ensure optimum recycling. 
All of our packaging materials are environmentally compatible 
and can be recycled.

Used appliances

Used appliances contain valuable materials that can be 
recycled. 
The various assemblies can be easily dismantled. Synthetic 
materials are marked accordingly. Assemblies can therefore be 
sorted by composition and passed on for recycling or disposal.

Old electrical and electronic appliances

This symbol means that the product must not be 
disposed of with other waste, and instead must be 
taken to the waste collection points for treatment, 
collection, recycling and disposal.

The symbol is valid in countries where waste 

electrical and electronic equipment regulations apply, e.g. 
"European Directive 2012/19/EC on old electronic and 
electrical appliances". These regulations define the framework 
for the return and recycling of old electronic appliances that 
apply in each country. 

As electronic devices may contain hazardous substances, it 
needs to be recycled responsibly in order to minimize any 
potential harm to the environment and human health. 
Furthermore, recycling of electronic scrap helps preserve 
natural resources. 

For additional information on the environmentally compatible 
disposal of old electrical and electronic appliances, please 
contact the relevant local authorities, your household waste 
disposal service or the retailer where you purchased the 
product.

You can find more information here: 
www.weee.bosch-thermotechnology.com/

9

Open  Source  Software

Bosch Thermotechnik also uses Open Source Software to 
control the products.

A USB stick with open source information is included in the 
scope of delivery of the central controller. 

For open source information and to download available 
software update 

 https://www.bosch-thermotechnology.com/global/

Comprehensive information and information on the installed 
software version can be called up via the Help function of the 
central controller (

 Chapter 7, page 22).

10

Data protection notice

Information on supplementary data protection can be 
called up with the assistance of the central controller 
(

 Chapter 7, page 22).

The operator of the system is responsible for protecting the 
customer data on the central controller. Designations that 
indicate the names of actual users are and their usage habits 
should not be assigned to indoor units or time programs. If a 
customer asks for all his data to be removed, this can be done 
by deleting the corresponding user account.

Summary of Contents for ACC MT

























Reviews: