16
Electronic Control Box Installation
Locate the Electronic Control Box and 4–3.5x22
screws.
Use 4–3.5x22 screws to mount the control box to the
table top as shown in Figure 9. Use the holes drilled
previously. See Figure 3 on page 11.
45x45
Gusset
45x45
Round Cover
Cap
Electronic
Control Box
3.5x22 Screws
INSET
Figure 9
Locate 8–45x45 round cover caps.
Place a round cover cap over each 45x45 gusset to
cover the exposed mounting hardware. Tap lightly into
place with a soft mallet. See the inset drawing on
Figure 9.