Installation and connection
en
19
Mark for the holes at the left-hand
stop
Mark for the holes at the right-hand
stop
3.
At the previously marked points,
use a Forstner 35 mm drill to drill
the holes for the hinges. At the
previously marked points, use a
2 mm twist drill to drill holes for
the screws.
4.
Insert the hinges into the holes
and screw them in.
5.
Screw on the counter plates for the
magnetic catches.
6.
Insert the hinges into the appliance
- .
Summary of Contents for 853/7441
Page 47: ...Cleaning and servicing en 47 3 Connect the water inlet hose and check for leaks ...
Page 61: ......
Page 62: ......
Page 63: ......
