Bosch 853/7441 User Manual And Installation Instructions Download Page 22

Page: 22 / 64

Installation and connection

Connecting the appliance

Connect your appliance to the power
supply, water inlet and water outlet.

Connecting the water inlet hose

Note:

Please read the information in

the Safety →

sections

to ensure that you use the appliance
safely.

WARNING

Risk of electric shock!

The appliance contains live parts.
Touching live parts is dangerous.

▶

Do not immerse the electrical
AquaStop valve in water.

Connect the water inlet hose to a
tap (26.4 mm = 3/4").

¾˝

min.

10 mm

17 mm

¾˝

min.
10 mm

Open the water tap carefully and
check that the connection points
are tight.

Water outlet connection types

This information is intended to help
you to connect this appliance to the
water outlet.

Note:

Please read the information in

the Safety →

sections

to ensure that you use the appliance
safely.

ATTENTION!

When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.

▶

Secure the water outlet hose
against unintentional loosening.

Drainage into a si-
phon.
Secure the connec-
tion point with a (24–
40 mm) hose clamp.

Drainage into a wash
basin.
Fix and secure the wa-
ter outlet hose with an
elbow.

Drainage into a plastic
pipe with rubber
sleeve or into a gully.
Fix and secure the wa-
ter outlet hose with an
elbow.

Connecting the appliance to the
electricity supply

Note:

Please read the information in

the Safety →

sections

to ensure that you use the appliance
safely.

Insert the mains plug of the appli-
ance's power cable in a socket
nearby.
The connection details of the appli-
ance can be found under Tech-
nical data →

Page 59

Check the mains plug is inserted
properly.

Summary of Contents for 853/7441

































































Search results

Summary of Contents for 853/7441

Reviews:

Related manuals for 853/7441

Brands by name

Popular brands

Bosch 853/7441, User Manual And Installation Instructions

Search results

Summary of Contents for 853/7441

Reviews:

Related manuals for 853/7441

Brands by name

Popular brands