1 0 |
Concentric Horizontal Vent Kit
Bosch Thermotechnology Corp.
Data subject to change
Installation Manual
3.4 Redirecting The Vent Discharge
The vent discharge can be redirected to reduce the risk of cross
contamination.
f
Remove the screws [A] and disconnect the terminal end [B].
B
2.
1.
A
Fig. 11
f
Rotate the terminal end [B] 180° so discharge faces upwards.
f
Refit the terminal end [B] and tighten the screws [A].
B
180
°
A
Fig. 12
f
The entire termination can now be rotated left or right ±40° to redirect
the plume (
Fig. 13).
±
80
°
Fig. 13
f
Use adequate weather resistant caulk to seal the penetration in the
wall and prevent moisture damage.
CAUTION:
When redirecting the flue discharge ensure it does not create
a hazard or nuisance.