Explanation of symbols and safety instructions
153
Tronic 1000 T | Tronic 2000 T – 6721831855 (2021/03)
environmentally compatible operation
of the system.
We recommend arranging an annual
maintenance and inspection contract
with the manufacturer.
▶ Have work carried out only by an
approved contractor.
▶ Eliminate all defects identified
immediately.
Every situation that deviates from the
conditions described in the instructions
must be assessed by an approved
specialist. If there is approval for this,
the specialist must specify a catalogue
of maintenance requirements, which
take wear and the particular operating
conditions into account, and which
comply with the standards and
requirements of the country and the
usage.
H
Handover to the user
When handing over the solar system,
explain the operation and operating
conditions to the operator.
▶ Explain operation – with particular
emphasis on all safety-related
actions.
▶ Point out that conversion or repair
may be carried out only by a licensed
contractor.
▶ Also point out the need for inspection
and preventative maintenance for
safe and environmentally friendly
operation.
▶ Hand over the installation and
operating instructions to the user for
safekeeping.
H
Safety of electrical devices for
domestic use and similar
purposes
The following requirements apply in
accordance with EN 60335-1 in order to
prevent hazards from occurring when
using electrical appliances:
“This appliance can be used by children
of 8 years and older, as well as by people
with reduced physical, sensory or
mental capabilities or lacking in
experience and knowledge, if they are
supervised and have been given
instruction in the safe use of the
appliance and understand the resulting
dangers. Children shall not play with the
appliance. Cleaning and user
maintenance must not be performed by
children without supervision.”
“If the power cable is damaged, it must
be replaced by the manufacturer, its
customer service department or a
similarly qualified person, so that risks
are avoided.”
