16
| English
2 609 932 939 | (21.5.14)
Bosch Power Tools
1
On/Off switch
2
Lock-off button for On/Off switch
3
Thumbwheel for speed preselection (GKS 55 GCE)
4
Auxiliary handle (insulated gripping surface)
5
Spindle lock button
6
Scale for mitre angle
7
Wing bolt for parallel guide
8
Wing bolt for bevel-angle preselection
9
Cutting mark, 0°
10
Cutting mark, 45°
11
Hex key
12
Parallel guide*
13
Retracting blade guard
14
Lever for retracting blade guard
15
Base plate
16
Wing bolt for bevel-angle preselection
17
Sawdust ejector
18
Blade guard
19
Handle (insulated gripping surface)
20
Clamping bolt with washer
21
Clamping flange
22
Saw blade*
23
Mounting flange
24
Saw spindle
25
Extraction adapter*
26
Clamping lever for cutting-depth preselection
27
Cutting-depth scale
28
Set of screw clamps*
29
Guide rail*
30
Connection piece*
31
Vacuum hose*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-5.
Typically the A-weighted noise levels of the product are:
Sound pressure level 92 dB(A); Sound power level
103 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
Cutting wood: a
h
=2.5 m/s
2
, K=1.5 m/s
2
,
Cutting metal: a
h
=3.5 m/s
2
, K=1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
Circular Saw
GKS 55
GKS 55 GCE
Article number
3 601 F64 0..
3 601 F64 9..
Rated power input
W
1200
1350
No-load speed
min
-1
5200
2100 – 5100
Rotational speed under load, max.
min
-1
3800
4900
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
mm
mm
55
38.5
55
38.5
Spindle lock
Speed preselection
–
Constant electronic control
–
Reduced starting current
–
Base plate dimensions
mm
145 x 290
199 x 300
Saw blade diameter, max.
mm
160
160
Saw blade diameter, min.
mm
150
150
Blade thickness, max.
mm
1.8
1.8
Tooth thickness/setting, max.
mm
2.6
2.6
Tooth thickness/setting, min.
mm
1.8
1.8
Mounting bore
mm
20
20
Weight according to EPTA-Procedure 01/2003
kg
3.5
3.9
Protection class
/
II
/
II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
OBJ_BUCH-244-007.book Page 16 Wednesday, May 21, 2014 11:05 AM
