English 4
5. Place the right corner piece as shown (see Figure 3:
Right side corner cover placement). Align the round
hole in the corner cover with the hole at 1.
Figure 3: Right side corner cover placement
6. Insert screw (saved or from the kit) into hole 1 and
lightly tighten (see Figure 4: Screw placement).
Figure 4: Screw placement
7. Press up on the corner cover at the arrow (see Figure
5: Tighten screw) while finishing the tightening of the
screw.
Figure 5: Tighten screw
8. Repeat the previous steps 4 through 7 for the left side
corner cover.
9. If necessary, have a qualified service technician
reattach electrical or gas connections.
10. Slide the range back into position. If necessary, to
avoid scratching the countertop, adjust the height of
the range by adjusting the range feet (see Figure 6:
Adjusting range height). Be sure to engage the anti-tip
bracket. See the
Tip Over Hazard Warning
earlier in
this instruction and also in the
Slide-In Range
Installation Manual
.
Figure 6: Adjusting range height
