Disposal 49/56
RE 15215-01-B/11.2015, MCR Series 30, 31, 32, 33 and 41,
Bosch Rexroth AG
12 Disposal
Incorrect disposal of the radial piston motor, hydraulic fluid or packaging material
could lead to pollution of the environment.
Observe the following points when disposing of the radial piston motor:
1.
Completely drain the radial piston motor of hydraulic fluid.
2.
Dispose of the radial piston motor packaging material in accordance with the
national regulations in your country.
3.
Dispose of the hydraulic fluid according to the national regulations of your
country. Reference should also be made to the applicable safety data sheet for
the hydraulic fluid.
4.
Dismantle the radial piston motor into its individual parts and properly recycle
these parts.
5.
Separate the parts into:
– Cast parts
– Steel
– Aluminum
– Non-ferrous metal
– Electronic waste
– Plastic
– Seals
13 Modification and adjustments
There are no facilities for end users to carry out modifications or adjustments to
the radial piston motor. The only exception to this is the fitting of an optional speed
sensor (see chapter 7.4.5 “Assembly of the speed sensor” on page 33).
The Bosch Rexroth warranty only applies for the delivered configuration. Any
unauthorised modifications or adjustments carried out to the radial piston motor
will invalidate the product warranty.
If any modifications or adjustments to the radial piston motor are considered
necessary in the first instance Bosch Rexroth RM Engineering Department should
be contacted (contact details see chapter 10.5 "Spare parts" on page 47).
