10/56
Safety instructions
Bosch Rexroth AG
, MCR Series 30, 31, 32, 33 and 41, RE 15215-01-B/11.2015
•
If unsuitable products are installed or used in applications that are of relevance
to safety, unexpected operating conditions may occur in the application which
could result in injury to persons or property damage. For this reason, only use
the product in a safety-relevant application if this use is expressly specified and
permitted in the product documentation, for example in ex-protection applications
or in safety-related parts of a control system (functional safety).
•
You may only commission the product if it has been determined that the end
product (e.g. machinery or a system) into which the Rexroth products are installed
complies with the country-specific provisions, safety regulations and standards of
the application.
2.6 Product-specific safety instructions
The following safety instructions apply for chapters 6 to 14.
WARnInG
Motor external overload!
Danger to life or risk of injuries, motor failure resulting in major motor break up and
failure to support loads .
▶
To ensure the durability of the motor for the specific combination of external
loads a technical approval by Bosch Rexroth RM Engineering Department is
required for each application. Please contact your Bosch Rexoth sales partner.
Danger from excessively high pressure!
Danger to life or risk of injury, damage to equipment!
Changing the factory pressure settings can cause pressure to increase beyond the
permissible maximum.
Operating the unit above the permissible maximum pressure can cause component
failure and hydraulic fluid to escape under high pressure.
▶
Changes to the factory settings must only be made by Bosch Rexroth specialist
personnel.
▶
In addition, a pressure-relief valve is needed as back-up in the hydraulic System
or in the main pump. If the radial piston motor is equipped with a pressure cut-
off and/or a pressure control, this is not an adequate back-up against pressure
overload.
Danger from suspended loads!
Danger to life or risk of injury, damage to equipment!
Improper transportation may cause the radial piston motor to fall potentially
causing crushing injuries or damage to the product.
▶
Make certain that the forklift truck or lifting device has adequate lifting capacity.
▶
Never stand under or put your hands under suspended loads.
▶
Ensure your position is stable during transportation.
▶
Use your personal protective equipment (e.g. safety glasses, safety gloves,
suitable working clothes, safety shoes).
▶
Use suitable lifting devices for transportation.
▶
Observe the prescribed position of the lifting strap.
▶
Observe the national laws and regulations on work and health protection and
transportation.
