41
AT THE END OF WORK
47.
AT THE END OF THE WORK
At the end of the work, do as follows:
1.
Stop the machine and engage the parking brake, pressing the pedal (1)
2.
Raise the central brush from the ground, using the lever (2)
3.
Raise the right side brush from the ground, using the lever (3)
4.
Raise the left side brush from the ground (if present as an optional), using the lever (4)
5.
Close the hopper hatch, pulling the lever (5) upwards. As soon as the debris hopper hatch is closed,
the indicator light (6) on the instrument panel will go out.
6.
Switch off the vacuum, turn the lever (7) to the right
7.
Activate the filter shaker on the filter by pressing the switch (8) on the control panel
WARNING!
Do not keep the switch (5) pressed longer than ten seconds, repeat
this operation two or three times.
2
4
3
1
5
6
8
7
