![Bortek hammerhead 1100srx Use And Maintenance Manual Download Page 27](http://html1.mh-extra.com/html/bortek/hammerhead-1100srx/hammerhead-1100srx_use-and-maintenance-manual_2789717027.webp)
27
MACHINE PREPARATION
28.
CONNECTING THE LPG CYLINDER (BIFUEL VERSION)
The machine is supplied without an LPG cylinder. To connect the cylinder to the machine, proceed as
follows:
1.
Block the machine by engaging the parking brake, pressing the pedal (1) down
2.
Check the main machine switch is in the “OFF” position, and if this is not the case, turn it by a quarter
rotation to the left
3.
Turn the cover rotation catch (2)
4.
Using the handle (3) turn the rear cover as far as it will go
5.
Loosen the tie rod (4) with the right equipment
6.
Position the cylinder as shown in the figure. If it is in the right place, the tap (5) will be on the rear of
the machine.
WARNING
: Use only 15kg LPG cylinders with dimensions of 315x655 (Ømax x
height in millimetres)
7.
Fix the chain (6) to the tie rod (4), using suitable equipment tension the chain (6) by tightening the tie
rod (4)
1
2
3
4
5
4
6