background image

Page 

12

 of 

12

 Rev 03

 

 

13 – Warranty / after sale service

 

BOROTTO® (hereinafter the Manufacturer) grants a 24 month warranty to the product from the date of purchase. 
During this period, the Manufacturer undertakes to repair at its expense any defect that might occur during normal 
operation of the appliance, attributable to manufacture.

 

NOTE:

 the rubber hoses have no warranty

 

Upon requesting servicing under warranty, show this contract complete with date, stamp and signature.

 

The appliance must be shipped in its original packaging under the customer's responsibility.

 

If  the  appliance  is  in  the  warranty  period  and  has  been  used  correctly  it  will  be  repaired  free  of  charge.  It  is 
understood  that  no  reimbursement  shall  be  acknowledged  in  the  event  of  lack  of  fault  or  defect of  the  product. 
However, the Manufacturer reserves the right to charge to the customer the expenses incurred for the demand for 
servicing in warranty in the absence of the prerequisites.

 

The warranty does not cover damage caused by:

 

 

transport;

 

 

wear, water, dirt;

 

 

use in conditions other than those herein specified by the Manufacturer;

 

 

repairs or modifications made by personnel not authorised by the Manufacturer;

 

 

force majeure (earthquakes, floods, fires etc.).

 

Only use the appliance for the purpose it is intended for; uses other than those indicated in these instructions shall 
be deemed as hazardous and the Manufacturer disclaims any and all liability for any damage to persons, animals or 
property arising from failure to comply with this warning.

 

The Manufacturer shall not be deemed liable, nor shall they grant any servicing under warranty or compensation for 
negative results due to failure to comply with these instructions, misuse, incorrect installation of the appliance or 
problems arising from the inadequacy of the electrical installations or other facilities, or arising from environmental, 
climate or other conditions, or from entrusting the appliance to minors or persons manifestly unsuitable to using or 
handling the appliance.

 

No compensation shall be requested from the Manufacturer for indirect damage due to loss of material occurred as 
a consequence of product defects such as, eggs inserted or to be inserted in the incubator, or further damage to 
property, persons or animals.

 

 
 

BOROTTO ®

 

Via Papa Giovanni Paolo II, 7

 

37060 Buttapietra (Verona) Italy 

 

VAT: 03787910235

 

EAI No.: VR

-

365973   TRADE REGISTER 143429

 

EEE REGISTRATION NUMBER: IT14080000008557

 

web site: 

WWW.BOROTTO.COM

 

 

 
 
 

 

Date, stamp and signature for the warranty: 

 

 

Summary of Contents for SIRIO













Reviews: