11
·
Retighten the locking levers (8).
Setting the cutting angle
·
Loosen the locking height lever (8).
Turn the adjustment knob
clockwise to move Hight
fence (16) upward until it
unfits the angle fence (7).
·
Undo the locking levers (6).
·
The set angle is indicated by the arrow.
·
Set the required angle on the scale.
·
Retighten the locking levers (6).
Possibilities:
Change:
1, Step Memory System
1 mm / grid
2, Stop square
1
°
/ grid
3, Thickness biscuit dowels
4 mm
4, Combination
Optional
The setting of the vertical position of the jointer is important above all for mitre joining
or combined with varying material thick-nesses (workpiece thickness).
