![background image](http://html.mh-extra.com/html/boretti/puro-quadro-800/puro-quadro-800_installation-manual_2788450017.webp)
The Plasma Filter FILTRO PURO QUADRO 800 is the only domestic plasma air treater
which produces NO OZONE at all.
WARNINGS:
•
Only use the Plasma Filter PURO QUADRO 800 in combination with an extractor unit with grease filters (in connection with fire retarding
properties).
•
Always ensure good ventilation so there is a sufficient supply of oxygen. For this, see the guidelines for your cooker hood.
•
Never insert anything into the module – risk of electric shock.
•
Never handle the module or cable with wet hands.
•
Never use the module if any part is damaged.
•
Never block the air inlet or outlet.
•
This device can be used by 8-years-old children and above and persons with reduced physical, sensory or mental capacity or lack of experience and
knowledge only if they are supervised or given instructions for safe use of the device and understand its dangers.
•
Children should not play with the device.
•
Maintenance and cleaning should not be done by children without supervision.
•
Please observe the warnings and installation instructions in the user’s manual of your cooker hood.
•
Plasma Filter PURO QUADRO 800 has been developed for household applications only.
•
High flames or flambéing below an extractor unit is strongly advised against.
•
Overheated oil in a pan under the extractor unit is a fire hazard.
•
Harmful gases (carbon monoxide etc.) cannot be removed by the Plasma Filter PURO QUADRO 800.
INSTALLATION INSTRUCTIONS:
•
Exclusively use the module with the supplied cable plug.
•
Open the packaging carefully and remove the Plasma Filter PURO QUADRO 800 . Check the filter for any visible damage before fitting. Keep the box
for possible return until after the operational check. Then ensure environmentally friendly processing of the waste packaging material.
•
For the installation, please, follow the instructions described in the next two pages.
•
Please, ensure that the connection between Plasma Filter PURO QUADRO 800 and the motor outlet is tight enough. System can’t work properly if
there are air leaks.
•
Ensure that, after installation of the module, the cable plug remains accessible for disconnection.
•
The power cord of this unit can not be replaced. If the cable is damaged, the device has to be scrapped.
•
If the Plasma Filter PURO QUADRO 800 is not mounted according to these instructions, the relevant guarantee is invalidated.
Page 17 of 36
Summary of Contents for PURO QUADRO 800
Page 30: ...Pagina 30 di 32 ...