BORETTI MLWC82, User Manual

Page: 12 / 98

12
2.5 How to change the door opening
This appliance has reversible doors but is delivered with a right hand hinged
door. Should wish to reverse the hinge on your unit, follow the directions below:
1.Decorative screws 2. Door 3.Door Hinge 4.Screws
1. Open the door and remove the decorative covers (1) on the left hand side
as shown in Fig. A.
2. Fix the screws into these positions a per Fig.B, but do not fasten the screws.
3. Remove all screws from both the upper and lower hinge, and then remove
the door.
4. Rotate the door 180 degrees, and place the hinges into the screws fixed
in Fig.B. Once slotted onto these screws, tighten the screws to secure the
hinges (Fig D).
5. Placed the decorative covers in the right hand side and screw holes as
shown in Fig.D
2.6 Installing the appliance
Place you wine cabinet on a floor that is strong enough to support it when it
is fully loaded. The kitchen unit must be aligned horizontally and vertically.
You will need to install a furniture door frame to the front of the wine cabinet
once wine cabinet has been installed.
EN
Boretti Wine Cabinets / User guide - Installation advice