NL
FR
ES
EN
51
• Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [00] and a sound rings
and the heating zone stops.
To stop the sound and the blinking it is enough to press the key [T-] or [T+].
Booster function
The booster function [P] grants a boost of power to the selected heating zone. If this function
is activated the heating zones works during 10 minutes with an ultra high power. The booster is
foreseen for example to heat up rapidely big quantities of water, like nuddles cooking.
• Start up / Stop the booster function:
Action
Control panel
Display
Start up the booster
press key [P]
[P] control light is blinking
Zone selection
press key [+]
[P]
Stop the booster
press key [-]
from the boosted heating zone [9]
or press key [P]
[P] control light is blinking
press key [+] or [-]
from the desiredheating zone last power level
• Power management:
The hole cooking hob is equipped by a maximum of power. When the booster function is activated,
and not to exceed the maximum power, the electronic system orders to reduce automatically the
power level of an other heating zone. The display is blinking on [9] during a few seconds and then
shows the maximum of power allowed ( [6] or [8] ).
Heating zone selected
The other heating zone:
(example: power level 9)
[P] is displayed
[9] goes to
[6] or [8] depending the type of zone
Pause function
This function brakes all the hob’s cooking activity and allows restarting with the same settings.
• Start up / Stop the pause function:
Action
Control panel
Display
Engage pause
Press key [II]
Displays [II] in the 4 heating zone display
Stop the pause
Press key [II]
Pause control light is blinking.
and press any key [+] or [-]
Function «keep warm»
This function of maintenance to the heat makes it possible to reach and maintain automatically
a temperature of 70°C.
This will avoid liquids over spillage and the food to attach at the bottom of the pan.
