![background image](http://html1.mh-extra.com/html/boretti/bernini/bernini_use-and-care-manual_2788342023.webp)
Troubleshooting Your Grill
Problem
Solution
Grill will not light when the igniter button is
pushed.
• Is your gas supply turned on?
• If this is an L.P. grill, is there gas in your tank ?
Check your gas level.
• Is one of your burners turned on? Allow up to four
seconds of gas flow to ignite.
• Is your igniter working?
- You should hear a snapping sound when you
press the igniter?
- If you hear a snapping sound can you see a
spark at the electrodes?
Note - You will need to remove your cooking
grates and flavor grids to see the electrodes.
• Check to see if your igniter battery is installed
correctly with the negative side in.
• Check your igniter battery and replace if needed.
• Check for loose wire connections to the igniter
or electrodes.
• Check to see if debris is blocking the electrodes.
• If the igniter is not working can you light the grill
with a match?
GENERAL TROUBLE SHOOTING
You should inspect the burners at least once a year or immediately if any of the following conditions occur:
• The smell of gas.
• Flames appearing mostly yellow. (some yellow at the tips is OK)
• The grill will not get hot enough.
• Burners make a snapping noise.
• The grill heats unevenly.
SPIDER AND INSECT WARNING
Spider and insects can nest in the burners of this or any other grill and cause the gas to flow from the front of
the burner. This is very dangerous condition which can cause a fire to occur behind the valve panel, thereby
damaging the grill and making it unsafe to operate. We recommend you check the grill and remove any spi-
ders, insects and webs at least once a year to reduce this risk.
BEFORE CALLING CUSTOMER SERVICE
If the grill does not function properly, use the following checklist.