28
BORCAD Medical a.s.
739 45 Fryčovice 673, tel.: +420 558 640 631
www.borcadmedical.com
6 Setting the product
•
Check all delivered items after unpacking.
•
Install the equipment and accessories.
•
Install front panel (in case of beds with dismountable front panels).
•
Always install the bed on even floors.
•
When installing the bed, avoid collision with power supply cable or excessive
tensioning of the cable.
•
Check correct plugging in.
•
Avoid lose extension cables/ power socket bars lying on the floor.
•
Check all mechanical and electric protection elements are in place.
•
The bed has not any central switch. When disconnecting from power mains, plug
off power cable.
•
The power cable should always be accessible.
•
The power cable must not be connected through an extension cord and it
must not be connected to common multisocket inlets (trhree-way hub etc.).
•
No input cable of other devices can lead over the surfaces of the bed or over the
patient. When moving the bed, avoid pinching/kinking of any objects.
•
Pay attention to proper fixing of the approved accessories listed in the manual.
•
The birthing bed is installed by trained person. It can be operated in ordinary way
by trained personnel only. Trained personnel must be also educated on
appropriate height of infusion stand setting.
•
The training is provided by BORCAD Medical a.s. (manufacturer) representative
or its authorized dealership.
We recomend to set up the bed in to Welcome position:
•
Straight "horizontal" position at the lowest possible height of the bed.
•
The foot section and legrests is extended and set in the highest position,
where it serves as a lying area.
•
The bed is covered with government-issue sheets / disposable drapes.
•
Side handles are in the active position; safety function.
•
The hand grips are hidden away so they do not get in the way when the
mother enters the bed.
•
When the room is made dim in order to create a more pleasing atmosphere,
the backlight of the bed is switched on.
•
The wheels are braked with a central brake.
•
The staff always briefly instruct the mother on how to use the bed (control the
basic functions, the bed's adjustment) and showing the warning labels.
