bora PT11UMEN-000, Operating And Installation Instructions

Page: 13 / 24

EN
13
Installation
www.bora.com
5.5.1 Installing the control box behind the
floor unit fixed front panel
Fig. 5.7 Installed control box and cooktop
1 2 3 4 6 5
Fig. 5.8 Control box structure
[1] Control box
[2] Adjustment plates
[3] Fixed front panel (not included in scope of delivery)
[4] Power level sleeve
[5] Nuts
[6] Control knobs
X X
Draw the bore holes accordingly with the aid of the
drilling template provided.
5.5 Installing the cooktop
INFO A gap of one millimetre should be planned
between the built-in appliances.
INFO A gap of two millimetres should be planned
around the built-in appliances.
INFO The mounting rail supplied with the cooktop
should be installed between the cooktops as
well as between the cooktops and the cooktop
extractor.
INFO Cable protection (a false floor) should be
mounted below the appliance. This needs to
be removable for maintenance work.
>
20
100
7
Fig. 5.6 Side view of the cable protection and ventilation
Q Q
Cross bars on the kitchen unit in the area of the
worktop cut-out may need to be removed.
Q Q
The drawers and/or shelves in the floor unit must be
removable for maintenance and cleaning purposes.