EN
32
Operation
www.bora.com
Switching off the automatic heat up function
The activated automatic heat up function will end
prematurely if you
X
X
reduce the power level (continuous cooking level).
X
X
activate the heat retention level
v
.
X
X
switch off the cooktop.
6.3.3 Heat retention level
INFO
As the performance of the gas burner cannot be
reduced that low, the heat retention levels on the
gas cooktop are controlled by means of automatic
switching on and off.
Activating the heat retention level
15°
Fig. 6.3
Knob ring position for heat retention level
INFO
The knob ring position for the heat retention level
is between the 12 o’clock position and the 1
o’clock position.
X
X
Turn the knob ring approx. 15° clockwise from the 12
o’clock position until it slots into place.
Q
Q
v
appears in the control knob display.
X
X
Press the touch surface on the control knob for 1
second to activate heat retention level 1.
Q
Q
This is confirmed by a beep and the
,
symbol is shown
Q
Q
The gas burner is now operated for a specific time at
the lowest level and then switched off for a specific
time.
Heat retention level
1
2
3
Symbol
,
:
*
Temperature in °C
40
55
70
Tab. 6.2 Temperatures of the heat retention levels
INFO
The temperature information on the heat retention
levels can differ as they are influenced by the
cookware, the fill level, the different types of gas
and gas pressures. The temperature information
can also vary due to the influence of the cooktop
extractor.
INFO
Each gas cooking zone is equipped with a safety
thermocouple. This element detects if the flame
has gone out (e.g. if a pan has boiled over or there
is a strong draught). The gas supply is then turned
off and the burner is automatically reignited.
If reignition is not possible, the gas supply is
stopped. A gas leak is therefore prevented.
6.3.1 Switching on the cooking zone
Fig. 6.2
Switching on the cooking zone
X
X
Turn the knob ring from the 12 o’clock position to a
power level.
Adjusting the power level
X
X
Turn the knob ring to the desired power level.
Q
Q
Ignition is automatic and the cooking zone is operated
at the power level selected.
INFO
The selected power level is shown in the middle
7 segment display on the control knob.
INFO
The ignition process happens several times in
succession and generates a typical clicking noise.
6.3.2 Automatic heat up function
Switching on the automatic heat up function
X
X
Select the desired power level (continuous cooking
level). For more precise information on heating up
time, see the Device description chapter.
X
X
Within 3 seconds of setting the power level, press the
touch surface of the control knob for at least 1 second.
Q
Q
The automatic heat up function is activated and the
control knob shows an
A
in front of the continuous
cooking level selected (e.g.
A 3
).
Q
Q
The control knob display shows an
A
for as long as the
automatic heat up function is active.
Q
Q
Once the automatic heat up period has passed, the
power will be reduced to the selected continuous
cooking level.
Q
Q
If a higher continuous cooking level is selected while
the automatic heat up function is active, the new time
will automatically be valid.
Summary of Contents for PKG11
Page 42: ...EN 42 Notes www bora com 11 Notes ...
Page 43: ......