bora PKG11 Operating And Installation Instructions Download Page 29

Page: 29 / 44

Installation

www.bora.com

5.7.4 Exiting the configuration menu

Twist the knob ring until the display shows

Now press the touch surface on the control knob

again for 1 second to exit the configuration menu. The

display goes out and a beep sounds.

Turn the knob ring to the 12 o’clock position.

appears in the display for 10 seconds. The display then

goes out with a beep.

INFO

If no settings are changed in a menu or submenu

option for 2 minutes, the configuration menu is

closed automatically.

5.8 Initial operation

The appliance can be used for the first time when

installation and configuration of the gas cooktop are

complete.

5.8.1 Using the gas cooktop for the first

time

Switch the cooking zone on.

The electronic gas regulator will calibrate itself (humming

noises) and then the gas flame will automatically ignite in

the selected cooking zone.

The gas flame will burn steadily and evenly.

5.8.2 Using the gas cooktop with the

cooktop extractor for the first time

Switch the cooktop extractor to the maximum power

level.

Switch all cooking zones to the minimum power level.

The electronic gas regulator will calibrate itself (humming

noises) and then the gas flame will automatically ignite in

the selected cooking zone.

The gas flame will burn steadily and evenly (no reignition).

The gas flame will be slightly affected by the cooktop

extractor (airflow) – this is normal.

5.8.3 Faults during initial operation

When operating for the first time or after a prolonged

period without use or when the liquid gas bottles have

been changed, faults are possible:

The burner does not ignite. The control knob emits a

beeping sound and the power level display flashes.

There may be air in the gas pipe.

Repeat the ignition process via the touch surface on

the control knob.

The burner does not ignite and the cooktop does not

react.

The electronic gas regulator must be recalibrated.

Using configuration

C 5 0

, reset the gas regulator.

The control knob display shows an error message

(e.g. E001).

Using configuration

C 5 0

, reset the gas regulator.

5.9 Handover to user

Explain the main functions to the user.

Explain all safety-related aspects of operation and

handling to the user.

Adhere the supplied nameplate to the back of these

operating and installation instructions.

Provide the user with the accessories and operating

and installation instructions to be kept in a safe place.

Summary of Contents for PKG11













































Search results

Summary of Contents for PKG11

Reviews:

bora PKG11, Operating And Installation Instructions, Page: 29 / 44

Search results

Summary of Contents for PKG11

Reviews: