EN
39
Menu
www.bora.com
6.3.13 Menu item J:
F t Y ßp
Select the filter type
(only in the case of recirculation)
i
Menu item J only appears if the “recirculation system”
operating mode has been selected during configuration
of the extraction system.
The type of filter installed must be defined.
There are two different filters to choose from:
X
O
Filter type 1 (
F 1
)= BORA air cleaning box ULBF
(or other manufacturer’s with 300 hr service life)
X
O
Filter type 3 (
F 3
)= BORA air cleaning box ULB3X
(or other manufacturer’s with 600 hr service life)
Fig. 6.15
Selecting the filter type display
X
X
Select the type of filter installed (tap the corresponding
segment on the slider ).
X
X
Confirm and save the setting.
6.3.14 Menu item L:
F A n
Fan configuration
i
During fan configuration the type of fan installed and
the number of fans are automatically recognised by the
system and the configuration is adjusted accordingly.
During initial operation it is necessary for the installer to
check that the fans have been recognised correctly.
Fig. 6.13
Menu item B: Show filter type, change filter type and
reset filter service life
X
X
Tap a slider segment
X
O
The filter type is selected and the filter service life reset.
X
O
The new remaining service life of the recirculation filter is then
shown.
6.3.12 Menu item H:
A
Extraction system configuration
i
The extraction system operating mode must be set.
There are two operating modes to choose from:
X
O
Recirculation system (
C
c
)
X
O
Exhaust air system (
0 t
)
Fig. 6.14
Configuring the exhaust air system display
X
X
Select the corresponding operating mode
(tap the corresponding segment on the slider ).
X
X
Confirm and save the setting.
Summary of Contents for Classic 2.0 Series
Page 56: ...EN 56 Notes www bora com 11 Notes...
Page 57: ...EN 57 Notes www bora com...
Page 59: ......