EN
28
Operation
www.bora.com
5.4 Operating the cooktop extractor
i
To be able to operate the cooktop extractor, fan operation
must be active in the operating panel
(colour mode “blue”).
The slider and the fan symbol light up blue in the standard
display.
5.4.1 Setting the fan power level
The fan power levels can be adjusted in different ways:
X
X
tap on or
X
X
adjustment using the slider
X
X
by tapping a certain position on the slider
X
X
long press on or (adjustment in twos)
Increasing the power level
X
X
Swipe upwards to the required power level
or
X
X
tap until the required power level is reached
or
X
X
tap a higher position on the slider
or
X
X
long press on (power level is increased in twos: 0, 2, 4...)
Reducing the power level
X
X
Swipe downwards to the required power level
or
X
X
tap until the required power level is reached
or
X
X
tap a lower position on the slider
or
X
X
long press on (power level is decreased in twos: ... 4, 2, 0)
5.4.2 Fan power setting
Activating the power setting
X
X
Long press on the slider
at position 5
or
X
X
Tap on when power level 5 is active
X
O
An animation appears in the slider.
X
O
ßp
appears in the display (flashing 3x at first and then
continuous).
i
After 10 minutes, the power setting is automatically
switched back to power level 5.
Deactivating the power setting
The fan power setting is deactivated early if another power level
is set (see Setting the fan power level).
5.3.6 Childproofing feature
The lock symbol lights up in the operating panel display.
Permanently activating the childproofing feature
see the Menu chapter, menu item 2: Childproofing feature
Deactivating the childproofing feature for a cooking
session
X
X
Long press on the lock button (3 sec.)
X
O
The operating panel display lights up and the operating panel
is active again.
X
O
The lock button is dimmed.
5.3.7 Short-time timer (egg timer)
Activating the egg timer
X
X
Tap the egg timer button
X
O
The time appears in the 7-segment display above the sliders in
hours, minutes and seconds (
0
:
0 0
:
0 0
).
X
O
The system changes to colour mode “beige”.
X
O
The cooking zones in the display are dimmed.
Setting the time
See 6.5.9 Cooking zone timer
Start egg timer
X
X
Tap the start button
X
O
An acoustic signal can be heard and the set value is
confirmed.
X
O
The set time starts to count down.
X
O
The operating panel display changes to the standard display.
X
O
The remaining time is shown by the system exact to the
second.
X
O
10 seconds before the time runs out, the remaining time and
egg timer button start to flash.
Time lapsed
X
O
When the set time has lapsed an acoustic signal is heard
(max. 60 seconds).
X
O
The time display and egg timer button flash (max. 60
seconds).
X
O
The remaining time is counted down for another 60 seconds
maximum (
, 0
:
0 0
:
0 1
...)
i
You can stop the acoustic signal and flashing display by
tapping the egg timer button.
Deactivating the egg timer early
X
X
Long press on the egg timer button
X
O
The egg timer function is ended.
X
O
The operating panel display changes to the standard display.
Summary of Contents for Classic 2.0 Series
Page 56: ...EN 56 Notes www bora com 11 Notes...
Page 57: ...EN 57 Notes www bora com...
Page 59: ......
