EN
32
Operation
www.bora.com
X
O
C
appears in both cooking zone displays and
C L E A %
appears in the multi-function display.
X
O
The cleaning function is activated and the Tepan stainless
steel grill is heated to 70 °C.
X
O
During the heating phase, the Hot indicator flashes and an
animation appears in the cooking zone displays.
X
O
As soon as cleaning temperature is reached, the Hot indicator
lights up constantly and a different animation appears in the
cooking zone displays.
Deactivating the cleaning function
X
X
Tap the required cooking zone
X
X
Long press on the warming button
or
X
X
tap the minus button until the power level is 0
X
O
The cleaning function is deactivated.
X
O
The residual heat indicator
H
appears in the cooking zone
display if necessary.
i
The cleaning function is automatically deactivated after
10 minutes.
5.5.10 Cooking zone timer
i
The timer function can be used for each cooking zone.
Several timers can be activated at the same time (multi-
timer).
i
When the bridging function is active, the timer is adopted
for both cooking zones.
Activating the timer
X
X
Tap on a cooking zone
X
O
The additional cooking zone functions are displayed.
X
O
If the chosen cooking zone is not yet active (= power level
0
) a
power level can now be set.
X
X
Tap the timer button
X
O
The time appears in the 7-segment display above the sliders in
hours, minutes and seconds (
0
:
0 0
:
0 0
).
X
O
The system changes to colour mode “beige”.
Setting the time
X
X
Select the desired power level:
Command
Selection in hr/min/sec
Tap
0
:
0 0
:
0 0
Tap
0
:
0 0
:
0 0
Command
Increase time
Decrease time
Tap
Swipe
upwards
downwards
Tab. 5.3
Setting the time
X
O
The start button appears in the operating panel display.
X
X
Activate the bridging function
X
O
The second cooking zone will be activated and the functions
of the active cooking zone are automatically adopted.
X
X
Move the pot onto the second cooking zone.
X
O
After 10 seconds the first cooking zone and the bridging
function will be automatically deactivated by the pan size
recognition function.
5.5.8 Setting the warming level
i
There are three warming levels to choose from (also see
Appliance description chapter).
Activating the warming level
X
X
Tap the required cooking zone
X
X
Tap the warming button
X
O
The 1st warming level (
,
) is displayed.
X
O
The warming symbol is shown next to the cooking zone.
X
O
In the case of the Tepan stainless steel grill CKT the
temperature is also shown in the 7-segment display above the
slider.
Increasing or reducing the warming level
X
X
Tap the required cooking zone
X
X
Swipe upwards or downwards until the required warming level
is reached
Deactivating the warming function
X
X
Tap the required cooking zone
X
X
Long press on the warming button
or
X
X
tap the minus button until the power level is 0
X
O
The warming function is deactivated.
X
O
The residual heat indicator
H
appears in the cooking zone
display if necessary.
5.5.9 Cleaning function on the Tepan
stainless steel grill CKT
i
The cleaning function adjusts the Tepan stainless steel
grill to a constant temperature of 70 °C, which is perfect
for cleaning.
Activating the cleaning function
X
X
Tap the required cooking zone
X
X
Tap the warming button
X
O
The 1st warming level (
,
) is displayed.
X
X
Tap the minus button
or
X
X
swipe downwards
or
X
X
tap the lowest position on the slider
X
O
The two cooking zones are automatically linked and the
bridging symbol
is displayed.
Summary of Contents for Classic 2.0 Series
Page 56: ...EN 56 Notes www bora com 11 Notes...
Page 57: ...EN 57 Notes www bora com...
Page 59: ......
