EN
34
Operation
www.bora.com
Q
Q
If there is no input, the timer display will turn off after
10 seconds.
X
X
Press the timer button multiple times to increase
the duration by +10 minutes each time.
X
X
Change the minutes in the timer display by making a
selection on the setting ring.
Q
Q
Once the desired time has been selected, the timer
starts automatically.
7.2.18 Switching off the short-time timer
(egg timer) early
You can switch off the short-time timer early by
X
X
changing the remaining timer setting to
00
.
7.2.19 Setting the automatic cut-off
You can set an automatic cut-off for every cooking zone.
INFO
If several cooking zones are activated with an
automatic cut-off, the lowest timer value will be
shown and the timer control light for the cook-
ing zone in question will light up more brightly.
Prerequisite
Q
Q
A cooking zone has been selected.
Q
Q
A power level was set.
X
X
Select the desired cooking zone.
X
X
Press the timer button within 3 seconds.
Q
Q
00 will appear in the timer display for a few seconds
and the dot next to the display will flash.
X
X
Press the timer button multiple times to increase
the duration by 10 minutes each time.
X
X
Change the minutes in the timer display by making a
selection on the setting ring.
Q
Q
Once the desired time has been selected, the timer
starts automatically.
After the last input, the set time will be displayed in the
timer display for a few seconds.
7.2.20 Switching off the automatic cut-off
early
The activated automatic cut-off function will end early if you
X
X
change the remaining timer setting to
00
;
X
X
switch off the cooktop using the on/off switch .
X
X
Change the power level to 0.
7.2.21 Changing the timer settings
X
X
Press the cooking zone button for the cooking zone for
which you wish to change the automatic cut-off.
X
X
Press the timer button multiple times to increase
the duration by 10 minutes each time.
X
X
Change the minutes in the timer display by uniformly
swiping the setting ring.
7.2.13 Switching off the automatic heat up
function
The activated automatic heat up function will end
prematurely if you
X
X
change the power level;
X
X
activate the power setting P;
X
X
activate the heat retention level
v
;
X
X
switch off the cooktop using the on/off switch .
7.2.14 Heat retention level
Q
Q
The cooktop is switched on.
X
X
Select a cooking zone.
X
X
Press the multi-function button several times to
increase the heat retention level.
Q
Q
The cooking zone indicator will display the relevant
heat retention level, e.g.
:
.
X
X
Press the multi-function button again.
Q
Q
The heat retention level is deactivated.
Q
Q
The cooking zone will automatically switch off after
8 seconds.
7.2.15 Using the timer function
Info
The relevant timer control light shows whether
the timer is activated. The timer control
light lights up until the cooking zone has
automatically switched off after the pre-set
time has passed.
Prerequisite
Q
Q
The cooktop is switched on.
You can use 2 timer functions:
Q
Q
Short-time timer (egg timer – cooking zone does not
switch off automatically).
Q
Q
Automatic cut-off (for automatically switching off a
cooking zone).
You can set a time range of between 1 and 99 minutes for
both timer functions.
INFO
After the end of the time set, 00 will appear in
the time display for a few seconds and the dot
in the display or the relevant timer control light
will flash. A signal tone will sound for a few
seconds.
Q
Q
The signal tone and the flashing are automatically
deactivated after 2 minutes.
7.2.16 Switching the signal beep off early
X
X
Press any sensor button on the operating panel to end
the signal tone prematurely.
7.2.17 Setting the short-time timer
(egg timer)
X
X
Press the timer button
Q
Q
00 will appear in the timer display for a few seconds
and the dot below the display will flash.
