Application
BD CMT
-14-
6 Application
The BD CMT is designed for use with BOOT-DOC brand insoles only. Use with any
other insoles may result in permanent damage to your molding pillows and will void
your warranty.
BOOT-DOC insoles are made from thermo-moldable high quality materials. BOOT-
DOC insoles should be heated to recommended temperatures (refer to BOOT-DOC
Website or catalogue) with BOOT-DOC Heating Devices. Never heat insoles above
recommended temperature or you may damage the molding pillows and/or insoles.
Do not attempt to open the molding pillows since it might cause permanent damage
and leaking. Any attempt to open the CMT box without authorization will void your
warranty.
Do not use any sharp implements on or near the molding pillows such as pens,
sharp fingernails, knives, etc.
The CMT is not a toy! Do not leave your molding system where customers or
children can play with it.
7 Casting with the BD CMT
Before you start to use the BD CMT make sure
the BD Wax is evenly distributed within the
molding pillows.
1)
Place the customer´s feet into the molding
pillows by holding the forefoot firmly and sliding
the heel into the back of the pillows heel pocket.
The forefoot should be allowed to fall naturally
in the general footprint area.
2)
Position the molding pillows according to
customer’s hip width. The key is to align the
center of the knee thru ankle joint and the foot´s
second toe.
Summary of Contents for BD CMT
Page 2: ...78 650 003 07 12 2016 ...
Page 31: ......
