8
1. OFF-
Power off, press this button to power off LEDs.
2. ON-
Power on, press this button to power on LEDs.
3. DOWN-
Brightness down, press this button to low down LED brightness, 11
levels.
4. UP-
Brightness up, press this button to raise LED brightness, 11 levels.
5. R-
RED,
press to select RED color.
6. G-
GREEN, press to select GREEN color
.
7. W-
FULL ON, press to select R G B color full on
.
8. B-
BLUE, press to select BLUE color.
9. FLASH-
Auto change color, fast speed
.
10. STROBE-
Auto change color, slow speed
.
11. FADE-
Auto change color, slow fade
.
12. SMOOTH-
Auto change color, fast fade
.
13.
Various color mixing effect
6. Troubleshooting
Following are a few common problems that may occur during operation. Here are some
suggestions for easy troubleshooting:
The fixture does not work, no light
o
Check the connection of power
o
Measure the mains voltage on the main connector.
o
Check the remote battery
7. Fixture Cleaning
The cleaning of internal must be carried out periodically to optimize light output.
Cleaning frequency depends on the environment in which the fixture operates: damp,
smoky or particularly dirty surrounding can cause greater accumulation of dirt on the
fixture’s optics.
Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
Clean the external optics at least every 20 days. Clean the internal optics at least every
30/60 days
