Studio Electronics Boomstar Manual
57
Panels
recycled; default is channel 1. 2.0 software (a free update) will remember
all of your
OVERFLOW
and greatly expanded
LEARN
“preferences.” Rev. 1.0
OS defaults to (and cannot be changed) modwheel to filter, aftertouch to
filter, and last note priority. MIDI channel defaults to channel 1 but can be
changed in the aforementioned manner.
4.3.1.3
FOLLOWING THE BOOMSTAR POWER ADAPTER
CONNECTION PROCEDURE IS ESSENTIAL TO THE
PROPER FUNCTIONING OF YOUR UNIT––DON’T
DAMAGE YOUR BOOMSTAR AND VOID YOUR
WARRANTY BY “HOT-SWAPPING” THE POWER
TO THIS SYNTHESIZER!
The proper power connection, disconnection procedure and
IMPORTANT
WARNINGS
(as previously detailed on pp. 11 - 12 of this manual):
BOOMSTAR POWER ADAPTER CONNECTION PROCEDURE:
a)
Plug Bo/-15 VDC power supply male 5 pin din plug into
female 5 pin din
connector mounted on the right side of back panel,
near bottom of synth (marked Pin 1/: Com...).
b)
Plug female 3 prong IEC cable plug into +/-15 VDC power supply male
3 prong IEC socket.
c)
Plug male 3 prong IEC cable plug into AC outlet.
BOOMSTAR POWER ADAPTER REMOVAL PROCEDURE:
a)
Unplug female 3 prong IEC cable plug from +/-15 VDC power supply.
b)
Unplug female 3 prong IEC cable plug from AC outlet.
c)
Unplug Boomstar male +/-15 VDC power supply plug from female
connector on the right side of back panel, near bottom of synth
(marked Pin 1/: Com...).
