Studio Electronics Boomstar Manual
39
Panels
PANELS
4.1 Front Panel
4.1.1 Adjustment Holes
These unmarked holes on the front panel are motherboard access
points for calibration potentiometers, set by none other than Greg
St. Regis, or a trained factory tech, and tweaking them without
a knowledge and familiarity of their function could result in your
Boomstar sounding and playing quite poorly; that being said, some
interesting drive and VCA offset settings can be tailored to one’s own
preferences––proceed at own risk.
ONLY A FACTORY SUPPLIED PLASTIC SCREWDRIVER OR EXACT EQUIVALENT
CAN BE USED.
IMPORTANT WARNING: ONLY AN ANALOGIA INC./STUDIO ELECTRONICS
SUPPLIED PLASTIC SCREWDRIVER OR EXACT EQUIVALENT CAN BE USED TO
CHANGE THE BOOMSTAR’S FRONT PANEL ADJUSTMENT HOLE SETTINGS
TO INSURE UNIT IS NOT DAMAGED. BE CERTAIN TO STRICTLY FOLLOW THIS
REQUIREMENT.
THE IMPROPER TOOL AND OR USE OF SAID TOOL MAY RESULT IN
SERIOUS DAMAGE TO SYNTHESIZER AND OR SERIOUS INJURY TO OPERATOR.
THE OPERATOR OF THIS SYNTHESIZER ASSUMES ALL RESPONSIBILITY AND
LIABILITY. ANALOGIA INC./STUDIO ELECTRONICS––OWNERS, OFFICERS AND
EMPLOYEES, ASSUME NO RESPONSIBILITY OR LIABILITY FOR PERSONAL AND
PROPERTY DAMAGE INCURRED DUE TO ACCIDENT, CARELESS HANDLING,
ABUSE OR MISUSE, IMPROPER CONTACT OR GROUNDING, AND IMPROPER
TOOLS OR THEIR IMPLEMENTATION. OWNERSHIP AND/OR USE OF BOOMSTAR
SYNTHESIZER CONSTITUTES AN AGREEMENT WITH THESE TERMS.
