Studio Electronics Boomstar Manual
11
Setup Essentials
2.2 Smart and Safe Connections
Always power-off all audio gear before making any connections. Failing to
do so may damage your speakers, or other audio equipment and possibly
your Boomstar Synth.
After completing all connections, set all levels to 0. Power on the various
devices with audio amplifier or monitoring system last, then raise the
volumes to an appropriate listening level.
a)
Plug Bo/-15 VDC power supply male 5 pin din plug into
female 5 pin din
connector mounted on the right side of back panel,
near bottom of synth (marked Pin 1/: Com...).
b)
Plug female 3 prong IEC cable plug into +/-15 VDC power supply male
3 prong IEC socket.
c)
Plug male 3 prong IEC cable plug into AC outlet.
BOOMSTAR POWER ADAPTER REMOVAL PROCEDURE:
a)
Unplug female 3 prong IEC cable plug from +/-15 VDC power supply.
b)
Unplug female 3 prong IEC cable plug from AC outlet.
c)
Unplug Boomstar male +/-15 VDC power supply plug from female
connector on the right side of back panel, near bottom of synth
(marked Pin 1/: Com...).
IMPORTANT WARNING: DO NOT POWER ON OR OFF THE BOOMSTAR BY
ANY OTHER METHOD THAN THAT SPECIFIED ABOVE TO PREVENT DAMAGE
TO UNIT. BE CERTAIN TO STRICTLY FOLLOW THE AFOREMENTIONED
CONNECTION PROCEDURE CAREFULLY AND ACCURATELY.
THE IMPROPER
CONNECTION AND DISCONNECTION OF THIS POWER SUPPLY MAY RESULT
