BKS-ST-180C_Product Manual
BooCax
19
/
28
boocax.com
Path points
need to be set for the route that the robot passes through, such as turns and
gates,which must be marked (as shown in Figure 2 below: gray points are path
points).
Disinfection points
are set as required for the environmental site (as shown in Figure 3 below:
purple icons are disinfection points).
“Change“、”Connect" function：
Mainly used to connect "nearby points" in series.
“
Change
“is to switch point, that is, changing the current point of the robot to the selected
nearby point. After this operation, you can click "Connect
" to connect the robot's previous
path point or disinfection point with the current point.
“C
hange
”
and
“C
onnection
”
, these two functions are mainly designed to facilitate route editing.
2)
Free editing-adjust path
➢
If the route by rapid deployment is not applicable, click "
Free Edit
" to adjust the route. The
robot supports adding/deleting/moving points, changing running route, changing disinfection
points, etc.
