BKS-ST-180C_Product Manual
BooCax
18
/
28
boocax.com
possible;
⑤
As laser radar does not recognize accurately in abnormal environment (glass, mirror, pure
black object, grid, etc.), it is recommended to carry out appropriate treatment, such as pasting
frosted sticker, gray adhesive tape, etc.;
⑥
If the working scene is too large/noise, you can use "
Incremental composition
" to
enlarge/repair the map;
⑦
When passing the QR code, stay in front for more than 1 second, and there will be a
voice
prompt
after the entry is successful.
6.7.
Deploy route setting
The working path of robot consists of the starting point, path points and the disinfection points in
series.
Specific setting procedures follow the instructions of App, as shown below:
1)
Rapid deployment
➢
Charging point
: The position of the robot docking the charging pile
。
Click "Deploy route" to enter the route setting mode; push the robot to the charging pile for
docking as guided, and click Next to complete the setting.
➢
Path points and disinfection points:
deploy the points by pushing robot /dragging map
Mark the required location on the map, and then set the corresponding path
point/disinfection point ( The small blue icon is the corresponding location point)
