- 14 -
④
.Otherwise the
welding does not work properly.
4)
Close the appliance lid
①
. The press seal
⑩
presses the bag onto the welding wire
④
, to create
a smooth seam. Ensure that both corners of the
appliance lid
①
click closed. If necessary, press
them down once again on the markings and
so that the appliance lid
①
clicks into place and
locks tightly.
5) Press the Food button Mode Selection. If the choice
is dry, the dry indicator will light on . If the moist is
chosen, The Moist indicator lights up.
NOTE
►
You can halt the sealing process at any time by
pressing
.The seal lamp goes out.
CAUTION
–
PROPERTY DAMAGE!
If the seal lamp does not go out after a maximum
of 10 seconds, there is a fault with the appliance.
►
Remove the plug from the mains power socket
immediately. Do not attempt to repair the appliance
yourself. Contact the Customer Service department.
