- 13 -
1) Cut the desired length for your bag from the roll
using a pair of scissors. Cut as straight as
2) Open the appliance lid
①
by pressing the lid
release
⑧
and opening the lid
①
upwards.
3) Lay the open end of the bag as far into the
appliance so that the opening of the bag is located
centrally under the lower sealing ring
⑤
. The bag
should be inserted no further than the rear limiters
⑥
and must lie between the front limiters
⑦
. If the
bag lies over one or both of the two limiters
⑦
, then
the bag cannot be correctly welded.
NOTE
►
The bag opening must lie
fl
at on the welding wire
VAC Seal
VAC Seal
possible.
