USING THE TIMER
You can use the timer in two different ways:
•You can use it as a minute minder. In this case, the timer will not turn any
cooking zone off when the set time is up.
•You can use it as cut-off timer to turn one or more cooking zones off after time
is up.
- You can set the timer up to 99 minutes.
1.
Make sure the cooktop is turned on. And zone slection key is not activated
(zone indication ‘-‘is not blinking).
Note:
You can set minute minder before or after cooking zone
power setting finished.
1.
Touching the heating zone selection control that you want to set the timer for.
2.
Touch timer control, the “00” will show in the timer display. and the “0” fiashes.
3.
Set the time by touching the”-“”+” or “slider” control
4.
Touch timer control again, the “0” will flash.
5.
Set the time by touching the “-” “ +” or “slider” control (e.g.9), now the timer
you set is 95 minutes.
2. Touch timer key, “00” will show in the timer display and “0” will blink.
3. Set the time by touching the “-” “ +”or touching the “slider” control of the timer
(e.g. 5)
4. Touch timer control again, then “0” will flash.
5. Set the time by touching the “-” “+” or touching the “slider”, now the timer you
set is 95 minutes.
6. When the time is set, it will begin to count down immediately. The display will
show the remaining time.
7. Buzzer will bips for 30 seconds and the timer indicator shows “- - ” when the
setting time finished.
Using the Timer as a Minute Minder
Using the timer to switch off one or more cooking zones
19
