Modello - Modèle - Model
Modell - Modelo
MULTIFREEZ BIO
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
PAGE
18/64
N° DOC
UM000565
5. STORAGE AND DISMANTLING
WARNING! Use protective gloves during unpacking and installation operations.
During unloading and movement operations, avoid tilting the machine and avoid sudden manoeuvres. The unit is shipped anchored
onto a wooden base and protected by corner posts, cardboard top and nylon wrapping. Keep all packaging away from children. For
each subsequent handling of the cabinet, the use of the wooden platform is recommended. Carefully remove the packaging, taking care
not to damage the components and not to throw away those that will be needed for assembly. Keep all packaging away from children.
ATTENTION! After unpacking, check that the appliance has not suffered damage during
transportation.
WOODEN BASE
CARDBOARD CORNERS
POLYSTYRENE
CAGE WOODEN PACKAGING
CARDBOARD CORNERS
NYLONE COVERING
NYLONE COVERING
6. CHOICE OF THE INSTALLATION SITE
In selecting the place of installation, ensure that the following instructions are observed, this being vital for proper and troublefree
working of the cabinet:
•
Do not install the cabinet in the vicinity of heating radiators or other heat sources.
•
Do not install the cabint where it is exposed to direct sun light (e.g. through windows).
•
Do not expose the refrigeration unit to air currents from fans, open doors, conditioning units.
•
Keep the air intake and outlet area around the plinth area of the cabinet clear of cartons and other obstacles.
•
It is necessary taht the condensing unit obtains a good circulation of air around it; also the area around the condensing unit should
not be obstructed by boxes or other objects; keep a distance from the wall of
10 cm
. at least.
Air-Condi�on
7. USE
THE APPLIANCE IS SUITABLE FOR FREEZING PRE-PACKAGED PRODUCE.
THE APPLIANCE IS INTENDED FOR THE SOLE STORAGE OF PRE-PACKAGED
PRODUCTS.
THIS APPLIANCE IS ONLY DESIGNED FOR USE AT A MAXIMUM ALTITUDE OF 2000
METRES ABOVE SEA LEVEL.
THE APPLIANCE CANNOT BE USED FOR THE PRESERVATION OF PHARMACEUTICALS.
The manufacturer cannot be held liable for damage caused by people, property or the equipment itself due to display of products other
than the afore-specified.
