Modello - Modèle - Model
Modell - Modelo
MULTIFREEZ BIO
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
PAGE
17/64
N° DOC
UM000565
3. LOADING
Warning! It’s absolutely forbidden to place the product in the tanks over the max load level.
It is fundamental not to exceed the load limits indicated to avoid altering correct air circulation and thereby avoid a higher
product temperature.
WARNING:
• The product must not obstruct the display area completely.
• Avoid leaving shelves empty so as not to create turbulence wich
may prejudic refrige-rated air flow, and cause needless energy
consumption.
For the correct air circulation necessary to leave 4cm
free space between the product and the bottom of each
internal shelf.
Attention! It is strictly necessary to comply with the max loads indicated (Kg) for each shelf to avoid
deformation or breakage.
4. TRANSPORTATION
The display cabinet is contained in a specially crated package that enables transportation by the use of fork-lift trucks. For each
subsequent handling of the cabinet, the use of the wooden platform is recommended.
The unit is shipped anchored onto a wooden base and protected by corner posts, cardboard top and nylon wrapping.
It must only be handled using a fork lift truck with adequate power to the load. Positioning the appliance horizontally or on its side or
upside down is to be strictly avoided.
Handling is reserved to the authorised after-sales service.
The equipment MUST be kept vertical.
MODEL
LEFT SHELVES
CENTRAL SHELVES
RIGHT SHELVES
MULTIFREEZ BIO 1D
-
MAX 50 Kg
-
MULTIFREEZ BIO 2D
MAX 50 Kg
-
MAX 50 Kg
MULTIFREEZ BIO 3D
MAX 50 Kg
MAX 47 Kg
MAX 50 Kg
MULTIFREEZ BIO 4D
MAX 50 Kg
MAX 47 Kg
MAX 50 Kg