15
(J) Device Number Setting
(1) Device Number Setting is required under the condition of QSS-4000 Concentrated temperature
management System for soldering iron.
①
Setting of Device Number
Initial Setting: 1 Setting Range: 1 ~ 95
: At the operation mode, push
△
key with pressing key in 3 seconds,
is indicated at
PV screen
: Push
key 4 times,
is indicated at PV screen.
: Input Device Number by
△▽
key on the SV screen, then push
key 6 times to return to
operation mode.
Operation mode
⇒
Input type setting
screen
⇒
Device No. setting
screen
⇒
Operation mode
Attention
The numbering must start with “
1
”
e.g. The first connected M50 ’ s device number must be “
1
” , and 2
nd
one is “
2
” and continued