The version number of the software
embedded within the ST535 is now
displayed. If you need technical support
you might be asked for this code together
with the serial number.
Next displayed is the thermocouple type
setting.This should match the type of
thermocouple fitted to the kiln and can be S
for 1300C, or K for 1200C
The final display will show the kiln
temperature.
All other lamps should be off.
Next to the main display, zone indication will light (1, indicates the
temperature of the lower zone, 2 of the middle zone and 3 of the
upper zone)
All other indications must be OFF
If any other indications are ON,
press
START/STOP
▶
6.4 Quick Start Guide
Press button
▶
(arrow to the right)
Main display will show a program
number
Use buttons
▲
or
▼
until display shows the desired program
number
Press
START/STOP
▶
Main display will show the program
start delay time (00.00) After 10
seconds program will start
automatically
17
